Instructions 

1.Wash the bike thoroughly, ensure all dirt is gone. Then wipe the bike clean and allow to dry completely before moving to the next step.

A dry, dust free enviroment is ideal

2. Spray TOTAL CLEAN onto all surfaces to be coated. Leave for 5 minutes and wile dry using one of the 2 bamboo cloths provided.

Hold the spray approx 6-8 inches from surface and be liberal with the amount, it’s important to get a completely decontaminated surface for the coating to bond to.

3. Apply 9HBikePro CERAMIC COATING to your bike using the applicator pad provided. Leave for 1-2 minutes then buff off the excess using the second bamboo cloth.

A little goes a long way. Only a few drops are needed to cover a relatively large area. Our advice is to apply in sections and work your way around the bike. Buff until shiny then move to next section.

4. Leave the ceramic coating to cure for 24 hours before using your bike then avoid washing the bike properly for 7 days as the liquid continues to bond.

Don’t use chemicals, solvents or abrasive cloths when cleaning bike. A spray down and dry will keep the bike looking brand new.